Home » C-BODY » C-BODY BRAKES » Miscellaneous Brake Components

 Checkout
Brake Shoe Guide Plate
Product ID: 2260788
Brake Shoe Guide Plate
 
Nice reproduction of the brake shoe guide plate used to secure the drum brake shoes on all 1962-76 11" drum brake equipped cars.  Made from the correct gauge steel and clear zinc plated for original appearance and corrosion resistance.  Two required per drum brake axle.
 
Reference Chrysler part number 2260788.
Price: $10.00
Add to cart

Caliper Pin Positioner Kit
Product ID: 2944722-3
Caliper Pin Positioner Kit
 

This pin positioner kit is correct for servicing two Kelsey Hayes calipers used on 1970 B & E-Body and 1969-70 C-Body vehicles.  Kit includes two left hand and two right hand pin positioners.  Positioners are formed from the correct gauge steel in the correct flat style, embossed with “UP” and arrow marks, and are yellow cadmium plated as original.  Long extinct, a must have item for the proper restoration of your 1970 vehicle!  Reference Chrysler part numbers 2944722-3.

Price: $70.00
Add to cart

Caliper Pin Positioner Kit
Product ID: 3461770-1
Caliper Pin Positioner Kit
 

This pin positioner kit is correct for servicing two Kelsey Hayes calipers used on 1971-72 B, C & E-Body vehicles.  Kit includes two left hand and two right hand pin positioners.  Positioners are formed from the correct gauge steel with bushing relief dimples, embossed with proper “UP” and arrow marks, and are clear zinc plated as original.  Reference Chrysler part numbers 3461770-1.

Price: $65.00
Add to cart

Front Wheel Grease Cap
Product ID: 1613416
Front Wheel Grease Cap
 

A very nice reproduction of the front wheel grease cap used on all 10” and 11” front wheel hubs from 1957-72 except Imperial.  Used on both drum and disc brake applications.  Formed from the correct gauge steel with the shape of an original part. Plated as original to prevent corrosion.  Two required per vehicle.  Reference Chrysler P/N 1613416.

Price: $14.95
Add to cart

Parking Brake Actuator Lever Set
Product ID: 2260800-1
Parking Brake Actuator Lever Set
 
Parking brake actuator levers for 1964-71 applications with 11" rear drum brakes.  Set includes pressed in pivot pins, a pair of zinc plated C-clips, and a pair of zinc plated wave washers.  Reference Chrysler part number 2260800-1.
 
One set required per vehicle.
Price: $55.00
Add to cart

Parking Brake Cable Clamp
Product ID: 2534926
Parking Brake Cable Clamp
 

Nice reproduction of the clamp used to secure the upper parking brake cable to the parking brake actuator on 1966-70 B-Body, 1970 E-Body, and 1970-75 A-Body cars.  Formed from correct gauge steel and includes 1/4-20 hex head mounting bolt & correct yellow zinc hex coni SEMS nut.  Reference Chrysler part number 2534926.

Price: $21.00
Add to cart

Parking Brake Cable Rear Connectors - Pair
Product ID: 2071094
Parking Brake Cable Rear Connectors - Pair
 

The ONLY 100% accurate reproduction available on the market of the parking brake cable rear connector.  Made from the correct gauge ROUND EDGE material and clear zinc plated as original.  Two used per car on 1962 A & B-Body, 1963-64 A, B, & C-Body, 1965 A & B-Body, 1966 A-Body, and 1971-74 A, B, & E-Body applications.  Sold as a pair.  Reference Chrysler part  number 2071094.

Price: $20.00
Add to cart

Parking Brake Strut Lever Set
Product ID: 2533892-3
Parking Brake Strut Lever Set
 
Parking brake strut levers for 1965-70 11" rear drum brake applications for all body styles.  Set includes pair of strut lever springs.  Right side lever stamped with "R".  Reference Chrysler part number 2533892-3.
 
One set required per vehicle.
Price: $35.00
Add to cart

Parking Brake Strut Lever Set
Product ID: 3580750-1
Parking Brake Strut Lever Set
 
Parking brake strut levers for 1971-75 11" rear drum brake applications for all body styles.  Set includes pair of strut lever springs.  Right side lever stamped with "R".  Reference Chrysler part number 3580750-1.
 
One set required per vehicle.
Price: $35.00
Add to cart

Power Brake Vacuum Hose Fitting
Product ID: 1944092
Power Brake Vacuum Hose Fitting
 

Excellent reproduction of the vacuum fitting found on the intake manifold for power brake applications with 1/8” auxiliary connection.  Machined with the correct tall hex base with 3/8” NPT threads, formed and bubble flared steel tube is silver soldered into place, and then silver cadmium plated for original appearance.  Used on power brake vehicles (except 1968-69 Charger) that are equipped with either an Air Grabber hood or A/C.  Also used on 1960-65 vehicles requiring vacuum for the heater controls.  Single 1/8” auxiliary port.  Reference part number 1944092.  Primary applications listed but others may exist.

Price: $45.00
Add to cart

Power Brake Vacuum Hose Fitting
Product ID: 1944154
Power Brake Vacuum Hose Fitting
 
Excellent reproduction of the vacuum hose fitting used on the intake manifold for power brake applications without Air Conditioning or Air Grabber, and not used on 1968-69 Charger.  Machined with the correct tall hex with 3/8" NPT threads and silver cadmium plated as original.  Reference Chrysler part number 1944154.
 
Not made in USA.
Price: $15.00
Add to cart

Power Brake Vacuum Hose Fitting
Product ID: 1948838
Power Brake Vacuum Hose Fitting
 

Excellent reproduction of the vacuum fitting found on the intake manifold for power brake applications with 1/8" and 1/4” auxiliary connections.  Machined with the correct tall hex base with 3/8” NPT threads, formed and bubble flared steel tubes are silver soldered into place, and then silver cadmium plated for original appearance.  Used on 1968-69 Chargers that are equipped with A/C.  Dual 1/8” and 1/4” auxiliary ports.  Reference part number 1948838.   

Price: $54.00
Add to cart

Power Brake Vacuum Hose Fitting
Product ID: 2405466
Power Brake Vacuum Hose Fitting
 

Excellent reproduction of the vacuum fitting found on the intake manifold for power brake applications with 1/4” auxiliary connection.  Machined with the correct tall hex base with 3/8” NPT threads, formed and bubble flared steel tube is silver soldered into place, and then silver cadmium plated for original appearance.  Used on 1968-69 Chargers and Daytona with power brakes without Hemi engine.  Also used on Superbird with all engines and all 1968-69 Hemi equipped vehicles except Charger/Daytona.  Single 1/4” auxiliary port.  Reference part number 2405466.   Primary applications listed but others may exist.

Price: $45.00
Add to cart

Power Brake Vacuum Hose Fitting
Product ID: 2944031
Power Brake Vacuum Hose Fitting
 

Excellent reproduction of the vacuum fitting found on the intake manifold for power brake applications with dual 1/4” auxiliary connections.  Machined with the correct tall hex base with 3/8” NPT threads, formed and bubble flared steel tubes are silver soldered into place, and then silver cadmium plated for original appearance.  Used on 1968-69 Chargers and Daytona with power brakes and Hemi engine.  Dual 1/4” auxiliary ports.  Reference part number 2944031.   Primary applications listed but others may exist.

Price: $54.00
Add to cart