Home » E-BODY » E-BODY TRANSMISSION » Clutch

 Checkout

CLUTCH BELL CRANK BALL STUD
Product ID: BS-2

Details 

Clutch Bell Crank Ball Stud for All Manual Transmission B- & E-Body Applications. Mounts to the Bellhousing. Zinc Plated to Resist Corrosion & Provides Proper Appearance.
Price: $17.00
Add to cart

CLUTCH BELL CRANK BALL STUD
Product ID: BS-1

Details 

Clutch Bell Crank Ball Stud for All Manual Trans Applications. Mounts to the Frame Rail Mounting Bracket. Zinc Plated to Resist Corrosion & Provides Proper Appearance. Includes Mounting Nut & Flat Washer.
Price: $17.00
Add to cart

CLUTCH BELL CRANK BALL STUDS
Product ID: BS-1-2

Details 

Clutch Bell Crank Ball Studs for All Manual Trans B- & E-Body Applications. the Longer Ball Stud Mounts to the Bellhousing & the Shorter to the Frame Rail Mounting Bracket. Zinc Plated to Resist Corrosion & Provides Proper Appearance. Nut & Flat Washer Included for Mounting to Frame Rail Bracket.
Price: $29.00
Add to cart

CLUTCH BELL CRANK FRAME BRACKET
Product ID: FB001

Details 

An Exact Reproduction of the B- & E-Body Factory Frame Rail Mounting Bracket for the Clutch Bell Crank Ball Stud. A Must for Converting an Automatic Trans Car to 4- or 5-Speed.
Price: $25.00
Add to cart

CLUTCH BELL CRANK FRAME BRACKET KIT
Product ID: FBKIT

Details 

Comes Complete with B- & E-Body Frame Rail Bracket, Both Ball Studs, Flat Washer & Nut. A Must for Converting an Automatic Trans Car to a 4- or 5-Speed.
Price: $45.00
Add to cart

CLUTCH FORK RETURN SPRING
Product ID: 705

Details 

Heavy Duty Spring Used to Keep Tension Between the Clutch Fork & Adjusting Road. Black & Oiled Finish. One is Required. Used on All Big Block Applications After 1965 & Small Block B- & E-Body Applications.
Price: $6.00
Add to cart

CLUTCH FORK ROD ADJUSTING NUT
Product ID: 979

Details 

Special Purpose Nut Used to Lock the Position of the Clutch Fork Rod Washer & Insulator. Zinc & Wax Finished for the Proper Appearance. After Proper Adjustment is Attained, Use a Hammer & Punch to Depress One of the Nut Shoulder Sections on to the Flat Surface of the Clutch Fork Actuator Rod. One is Required.
Price: $3.00
Add to cart

CLUTCH FORK ROD INSULATOR
Product ID: 412

Details 

Clutch Fork Rod Insulator. High Durometer Urethane for Increased Service Life & Improved Clutch Pedal Feel. One Required.
Price: $6.00
Add to cart

CLUTCH FORK ROD WASHER
Product ID: 483

Details 

Conical Faced Washer That Backs the Clutch Fork Insulator. Finished in Black Oxide as Original. One Required.
Price: $6.00
Add to cart

CLUTCH PIVOT SHAFT SERVICE KIT B & E-BODY
Product ID: B/E-ZKIT

Details 

Kit Provides All Components Necessary to Service 1966-74 B-Body & 1970-74 E-Body Clutch Pivot Shafts (Z-Bars). Includes Both Frame Side with Nut & Washer & Bellhousing Side Ball Studs, Two Ball Stud Seals, Two Spring Retainers, Two Nylon Cushion Washers, Four Nylon Ball Stud Bearing Halves, & One Pivot Shaft Bearing Retainer Wire.
Price: $65.00
Add to cart

CLUTCH RELEASE ROD
Product ID: 235

Details 

Straight Rod Used on 1970-74 E-Body & 1971-74 B-Body Big Block Applications. Zinc Plated as Original.

Price: $25.00
Add to cart

CLUTCH RELEASE ROD
Product ID: 240

Details 

Angled Rod Used on 1970-74 E-Body Small Block & 1966-70 B-Body Big & Small Block. Zinc Plated as Original.
Price: $28.00
Add to cart

CLUTCH RELEASE ROD SERVICE KIT
Product ID: 450

Details 

Straight Rod Kit Used on 1970-74 E-Body & 1971-74 B-Body Big Block. Comes Complete with Adjusting Rod, Special Lock Nut, Clutch Fork Return Spring, Nylon Wear Washer, Spring Retainer, Conical Washer, & Clutch Fork Insulator.
Price: $43.00
Add to cart

CLUTCH RELEASE ROD SERVICE KIT
Product ID: 449

Details 

Angled Rod Kit Used on 1970-74 E-Body Small Block & 1966-70 B-Body Big & Small Block. Comes Complete with Adjusting Rod, Special Lock Nut, Clutch Fork Return Spring, Nylon Wear Washer, Spring Retainer, Concial Washer, & Clutch Fork Insulator.
Price: $46.00
Add to cart

GEARSHIFT CONTROL TORQUE BRACKET-LOWER
Product ID: 60401

Details 

Gearshift Control Torque Bracket, Lower w/Auto Trans Floor Shift. Used on 1966-74 A- & C-Body, 1966-70 B-Body, & 1970 E-Body Applications with Automatic Transmission & Floor Shift. Comes Complete with Correct Conical KEPS Nuts & Correct Style Bushing. Mounts to Automatic Transmission Housing & is Necessary for All Floor Mounted Shifter Applications.
Price: $35.00
Add to cart

GEARSHIFT CONTROL TORQUE BRACKET-LOWER-B/E BODY
Product ID: 67717

Details 

Gearshift Control Torque Bracket, Lower, w/Auto Trans Floor Shift. Used on 1971-74 B- & E-Body Applications with Automatic Transmission & T-Handle Floor Shift. Comes Complete with Correct Coni KEPS Nuts & Correct Style Bushing. Mounts to Automatic Transmission Housing & is Necessary for All Floor Mounted T-Handle Shifter Applications.
Price: $35.00
Add to cart

GEARSHIFT CONTROL TORQUE SHAFT BUSHING
Product ID: 420

Details 

Gearshift Control Torque Shaft Bushing. Used on 1967-74 A-, B-, C-, & E-Body Applications with Automatic Transmission. Two Bushings Required for Both Column & Floor Shifted Automatic Transmission Equipped Cars. Also, Two Bushings Required for 1970 4-Speed Reverse Lockout Linkage.
Price: $5.00
Add to cart

WIRE RETAINING CLIP - MANUAL TRANS
Product ID: AX41T

Details 

Wire Retaining Clip for Manual Transmission Side Cover for the Reverse Light Switch Wire on 3- & 4-Speed Transmissions. Mounts Under Side Cover Retaining Bolts at Rear Top & Rear Upper Locations. Zinc Plated Correct Gauge Steel & Thermo-Plastic Coated for Proper Appearance. Two Wire Retaining Clips Required Per Transmission.
Price: $7.00
Add to cart

Z-BAR BALL STUD BEARING RETAINING WIRE
Product ID: 910

Details 

Spring Steel Wire That Secures the Frame Side Ball Stud Bearings in the Z-Bar Tube. Clips Over the Z-Bar Tube & Ends Insert Into Holes on Tube & Into Locking Groove of Bearings #938. One is Required.
Price: $8.00
Add to cart

Z-BAR BALL STUD BEARINGS
Product ID: 938(1)

Details 

Injection Molded in Delrin to Increase the Life & Reduce Friction, Yet Provides Correct Appearance of Nylon. Each Pair Fits Over the Z-Bar Ball Studs & Into the Z-Bar Tube. Two Pair are Required.
Price: $5.00
Add to cart

Z-BAR BALL STUD RUBBER SEAL
Product ID: 942

Details 

Injection Molded in Silicone Rubber for Higher Temperature Resistance & Long Life. Ball Side Lettering Shows Which Direction the Seal is to Be Installed. Keeps Dirt from the Ball Stud Bearings. Two are Required.
Price: $6.00
Add to cart