1972-73 340 Four-Barrel and 1974 360 Four-Barrel Throttle Cable Mounting Bracket complete with zinc plated hold down and correct hex coni keps nut.  Used on B & E-Body applications only.  Use part #0060 for A-Body applications.

 

Use for both 4-speed and automatic transmission applications.  Reference Chrysler part number 3577 561.

Concours quality reproduction of the carburetor linkage stud nut used on all Mid-1970 and later applications.  Features include formed flange washer, special locking patch, and zinc phosphate plated & oiled as original.  Reference Chrysler part number 6028699.

 

Part #699 is used with mid-1970 and later applications of carburetor linkage studs part #485, #701, #899, and #900.

1968-73 340 Four-Barrel Throttle Cable Mounting Bracket complete with zinc plated hold down and correct hex coni keps nut.  Used all years on A-Body and 1970-71 B & E-Body applications.  Hole in pivot pin changed for 1970 and later applications, but will still function properly.  Use part #561 for 1972-74 B & E-Body applications.

 

Use for both 4-speed and automatic transmission applications.  Remove pivot pin and spacer for use with 4-speed.  Reference Chrysler part number 2863 713 & 3462 741.

1967-68 Big Block 4-barrel with A/C Applications

 

Reference Chrysler part number 2806 452.

1969-74 Big Block 4-barrel with A/C Applications

 

Bolts to rear A/C compressor bracket with 1/4-20 hex head bolt.  Zinc plated as original.

 

Reference Chrysler part number 3899 962.